How to Replace an LED Light Module in a Ceiling Fan

Quick Answer

To replace an LED light module in a ceiling fan, turn off power, remove the light cover and old module, identify your correct replacement (often by model number or photo), connect the new module, and test before reassembling.

Step-by-Step Replacement Process

1. Turn Off Power and Remove the Light Cover: Switch off the fan and wall switch, then flip the circuit breaker for that room. Remove the light cover by twisting it counterclockwise or unscrewing the retaining screws. Set the cover aside safely. Common mistake: Forgetting to turn off the breaker can lead to electric shock. Always confirm power is off before touching wires.
2. Disconnect the Old LED Module: Locate the wiring connector or wire nuts connecting the module to the fan. Gently pull apart the connector or unscrew the wire nuts. Note which wires connect to which (usually white to white, black to black, and green or bare copper to ground). Take a photo of the wiring before disconnecting. This helps you reconnect the new module correctly.
3. Identify Your Correct Replacement Module: Check the model number on the old module or your fan's manual. If you cannot find it, measure the module diameter and count the number of pins or wires. For DEPULEY fans, you can select Universal and provide a photo after purchase to ensure compatibility. Ordering the wrong module is the most common delay. Using the model number or a photo avoids returns.
4. Install the New LED Module: Align the new module's connector with the fan's wiring harness and push together firmly, or connect wires using wire nuts (white to white, black to black, ground to ground). Tuck the wires neatly into the fan housing. Secure the module with screws if provided. Double-check that no bare wire is exposed outside the wire nuts. Loose connections cause flickering.
5. Reattach the Light Cover and Test: Place the light cover back on and twist clockwise or reinstall the screws. Restore power at the breaker, turn on the fan switch, and test the light. If it doesn't work, turn off power and recheck all connections. If the light flickers or doesn't turn on, the most likely cause is a loose wire or incompatible module. Recheck your model selection.

Product Facts

• Light Cover Decorative Cover for Depuley 35 / 42 / 52 / 60 / 72 inch Indoor Outdoor Celing Fan with LED Light: A sales receipt and order number are required to request a free replacement. If unsure about your model, choose Universal and provide a photo or model number after purchase. This means you can still get the right part even if you don't know your exact fan model, as long as you're prepared to share details.